歡迎光臨江陰市昌盛藥化機械有限公司
收藏本站
聯系我們
概述:
本機組是一種可以同時完成干燥和造粒的裝置。按工藝要求可以調節料液泵的壓力、流量、噴孔的大小,得到所需的按一定大小比例的球形顆粒。本機組工作過程為料液通過隔膜泵高壓輸入、噴出霧狀液滴,然后同熱空氣并流下降大部分粉粒由塔底排料口收集,廢氣及其微小粉末經旋風分離器分離,廢氣由抽風機排出,粉末由設在旋風分離器下端的授粉筒收集,風機出口處還可裝備二級除塵裝置、回收率在96-98%以上。本機組與物料接觸部份塔體、管道、分離器的材料,均采用SUS304制作。在塔體內部與外殼之間有足夠的保溫層,填充材料為超細玻璃棉,塔體設有觀察門、鏡、光源及控制儀表,由電器控制操作臺控制和顯示。本機組的熱源裝置采用蒸汽加熱或電加熱器,具有操作方便、啟動快、結構緊湊、熱風干凈清潔等優點。另外在電氣控制柜內裝有電加熱器的控制調節裝置,使進口溫度無級調節。對于缺電地區可采用蒸氣加熱或燃煤、燃油熱風爐等方式,局部或全部代替電加熱裝置。本公司可以提供根據用戶的實際需要的加熱方式。
Descriptions:
The unit can finish granulating and drying simultaneousIy and can produce spherical granules with sizes that you need only by adjusting the pressure, the discharge rate and the jet orifice of liquid materialspump. The unit's working process: The feed liquid is pumped into the centrifugal spray atomizer on the top of the drier by diaphragm pump. ln the spray atomizer the feed liquid wilI be fully atomized and then will be dried by the heating air. Majority granules will discharge from the bottomof the drier, the residual granules and exhaust gas wiII be separated by whirlwind separator, and then the exhaust air wiIl be exhausted by blower fan and the residual granuIes will be collected by the dust catcher at the bottom of whirlwind separator. Furthermore, the blower fan is equipped with secondary dust collect unit. The recovery ratio of the unit is 96% to 98%. The unit uses SUS304 stainless plates to make tower body, pipeline and separator. Between the tower body and the shelI there is a thermalinsulation layer that employs extra fine glass wools as filling materials. The tower body is weIl equipped with observation door, sight glass, Iight source and control meters and its operation is controlled and dispIayed by the operating desk. The unituses steam heating modeor electric heating mode and is characterized by convenient operation, fast start-up, compact structureand clean hot air. Besides, the control adapter of electric heater in electric controI cabinet can provide stepless control for the inlet temperature. Custom design in heating type available.
適用范圍:
噴霧干燥造粒:
化工:有機催化劑、樹脂、合成洗衣粉、油脂類、硫按、染料、染料中間體、白碳黑、石墨、磷銨等。
食品:氨基酸及類似物、調味料、蛋白質、淀粉、乳制品、咖啡抽取物、魚粉、肉精等。
制藥:中成藥、農藥、醫藥沖劑等。
陶瓷:氧化鎂、瓷土、各種金屬氧化物、白云石等。
噴霧造粒:氧化鋁、陶瓷粉、制藥、重金屬超硬鋼、化肥、粒狀洗衣粉、中成藥等。
噴霧冷卻造粒:胺基脂膠酸、石蠟、甘油酸脂、牛脂等。
噴霧結晶、噴霧濃縮、噴霧反應等方面也經常用到。
Application:
Spray drying and granuIating:
Chemicals: organic catalyst, resin,synthesized soap powder,oil,dyestuff,intermedium of dyestuff white carbon black, graphite and etc
Food: amino acid and anaIogue, seasoning, protein, starch, dairy products, coffee extraction, fish meal and etc.
Prepared Chinese medicine, agricultural chemicals, antibiotic, drug and etc.
Magnesia, porcelain clay, metal oxide, dolomite and etc.
Spray granulating: alumina, ceramic powder, drug, hard steel, chemical fertiIizer, granular washing powder, prepared Chinese medicine and etc.
Spray cooling and granulating: fatty acid, paraffin, gIyceric acid tallow and beef beef tallow etc.
Spray crystaIIizing: spray concentrating and spray reacting of materials.
設備特點:
干燥速度快,料液經霧化后表面積大大增加,在熱風氣流中,瞬間就可以蒸發95-98%的水份,完成干燥的時間僅需十幾秒到數十秒種,特別適用于熱敏性物料的干燥。所得產品為球狀顆粒,粒度均勻,流動性好,溶解性好,產品純度高,質量好。使用范圍廣,根據物料的特性;可以用熱風干燥,也可以用冷風造粒,對物料的適用性強。操作簡單穩定,控制方便,容易實現自動化作業。
Features:
Fast dry; 95-98% moisture can be evaporated instantaneously; only tens of seconds needed for dry; especiaIly for heat sensitive materials. Finished products have uniform granularity, good fluidity, exceptionaI dissolvability and high purity. Strong applicability for materiaIs; drying by hot air and granulating by cold air available. Easy and stable operation and convenient control.
江陰昌盛藥化機械有限公司(江陰市昌盛制藥機械廠),位于江陰市文林鎮,東連上海、南臨蘇州、無錫,地處“黃金通道”之稱的滬寧高速公路無錫東。本公司主營干燥機,混合機,制粒機,粉碎機等藥化設備。本公司有三十年的機械制造歷史、技術力量雄厚、工藝先進、設備齊全、由于生產及市場需要,本公司聘請了制藥、化工、食品機械方面的多名專家及工程技術人員,發展了一系列的制藥及化工機械設備,主要產品有中藥粉碎機、篩粉機、混合機、制粒機、干燥機等多種系列產品,為我國的制藥及化工、食品等行業的機械裝備更新換代作出了一定的貢獻!產品質量得到廣大用戶的一致好評。